Tuesday, November 17, 2009

DIY: Making a Seating Bench in the kitchen out of Ikea


We decided to make a seating bench in our eat in kitchen. I did a post about my desire to have a bench and in the reader comments, Vez, a fellow home blogger, reminded me that Samantha Pynn had recently done a project using Ikea cabinets to make a bench. That was the inspiration that made this project actually happen. (A nice reminder that I should post my dilemas on this blog, as the readers always seem to have the right answers) Here is how you too can make one.


(A) Get Ikea Cabinets (Lidingo Kitchen Cabinets, (34" Deep, 15" High) Ikea)
We bought 3 Ikea Upper Cabinets to fit our 96" space. We brought in our dimensions to Ikea, and they helped us pick the right cabinet widths. There are 2 sizes of cabinets the layout. The middle is slightly wider. I'll be honest....It wasn't inexpensive to buy the cabinets. But the convinience of building them, and the extra storage this created, was well worth it.

(B) Raise the cabinets off the ground
We raised the cabinets off the ground using long planks of wood. One 96" lengh at the front, and one 96" lengh at the back, like a train track. This is so that the doors could actually open. If we hadn't done this, the doors would scrape on the floor. We also did this to allow for air flow, as at the very right hand size of the bench, there is an air vent....and we weren't going to move that!

bech 1
(Kitchen Bench, before cushion)

  • We added a 4" foam cushion not only for comfort, but to bring the bench up to the right height needed for a table. (The right height is 18" -18.5" for a seat bench).
  • My Mom and I went down to Designer Fabrics here in Toronto to find the fabric for the bench. We needed A LOT of fabric. It's 8 feet long, and we did it double sided so incase a spill happens, we can "flip" the cushion. So there is no bad side.
  • When Mom was making the bench cushion, she decided to wrap the cushion in dacron for some added plushness.

My Mom also made me a back cushion in the matching fabric by taking 6 standard pillows that we're on sale for 50% off, and using the filler to create one long pillow. Shes a genius.

seat cushion - piping
Above: Our Cushion, made my by my Mom


Above: Our new kitchen bench

I ended up really not loving the pink & red fabric so I ended up re-doing the bench cushion. (Here is the post as to why I ended up not loving it) But below is the new and improved version of the bench! LOVE IT! here are the updated photos.




Ps., A little history....Why a kitchen bench?
For the last 20 years I had eaten my meals on a bench at my parents house. It was comfy to me, and just made a house a home. Below is a picture of my first bench...How awesome is this bench that we got to eat at for our childhood!! (I used to eat on the BLUE seat)

kitchen eat in
(Bench at my parents house, picture when they bought the house)

That bench stayed there until a few years ago, until when my parents renovated. We were sad to see the rainbow bench go, but thankfully, the kitchen bench just got "updated"..... not removed. :)

(Post reno, a kitchen bench is still there for me to sit at)
Resource List
New Chandelier - Hampton Bay, from Home Depot $139 View Online

Bench Cabinets - Lidingo Kitchen Cabinets, (34" Deep, 15" High) Ikea
Fabric + piping for the bench - Designer Fabrics
Inspiration for the Cabinet Bench, Pure Design with Samantha Pynn. Click here for episode


Anonymous said...

This is fabulous! I actually spent the better part of last Saturday morning at Ikea, trying to figure out how to accomplish this very same thing! One question, can you explain how you mounted the cabinets on 1" boards? Is it just a frame, or is it actually a sheet the full length/width of the cabinets that is 1" thick?

Lindsay said...

Thank you! It was pretty easy to do after knowing the right cabinets...remember you want to get "upper" cabinets, as base cabinets don't come with tops (as they assume a counter will be going on top)

We got 2 96" lenghs of wood, one piece for the front, one piece for the back, so it's kind of like two skis. ;) They are simply resting beneath the cabinets. We put felt pads on the bottom of the wood, so that if there was movement, it wouldn't hurt our floor.

You could take it one step further and glue the wood to the cabinets for extra stability, which we *may* do, but for now this works.

You could do a different height of wood, we just chose this heigh so that we could have a deeper cushion, as I felt as though it would be nicer on the tush. :)

I hope this helps! But if I've left anything out let me know. :)

Kay* said...

this is just going to be fantastic! can't wait to see the finished product. i've thought of doing this in my small space but don't think it would work as well because of the layout..so i just picked up a $35 dining table at the thrift store and am now trying to track down white eames shell chairs (like yours!)

vez said...

Looking good!

amyoliver said...

Fantastic, what a great job! It will look amazing with the cushion on it!! Well done

Venessa said...

looks great and seems pretty simple! can't wait to see that cushion complete!

Anonymous said...

I noticed that in the before picture there is a floor register...how did you deal with this? Or was is just covered by the Ikea cabinets?

Hopeless Chest said...

that's going to look great! i would love to do a banquette in my kitchen, but the layout is too awkward with a door on EVERY wall.

Pip said...

I love this idea so much. We've been wanting to do something built-in under our living room window and this is so much easier than building something from scratch! Now to find a door style that will match... ;o)

Lindsay said...

Thank you! Anonymous - The venting comes out the side now. ;)

Sharon said...

Lindsay ... this is fabulous. It looks custom ... and when you get the cushion it will be perfect. Congrats ... don't you love it when a project works just the way you envisioned it?

Laurel @ Ducks in a Row said...

I think you guys are great - this will be perfect with all the cushions! I love it.

Freckles Chick said...

It TOTALLY looks like a custom built-in; not Ikea-ish at all! And that's even w/out your sure-to-be-chic custom cushion. Can't wait to see it, L!

Sara @ Russet Street Reno said...

It's just perfect!!

Sweet T said...

Lindsay, Are these the Akurum line cabinets @ $110 each?


Lindsay said...

Sweet T ---- That sounds like the cabinets that we bought! I know that they were 24" in depth and approx 15" in height...The widths vary. Based on the lenght of space that we had, the Ikea staff helped us pick a configuration that worked....

If you can see in our picture, our "middle" cabinets are slightly wider than the two cabinets that sandwhich it. So the price may vary depending on the width. But I know that the cabinets + doors, came to I think $400 (don't quote me, I may be way off...I block out prices, so the shock doesn't linger too long.)

Here is my tip....What I did was actually bring in a picture (from Samatha's makeover) of the cabinets to Ikea and they helped us pick them. :-)

I hope this helps!

Erika @ BluLabel Bungalow said...

Lindsay, I love you blog. I arrived here from http://home23duncanboys.blogspot.com/ where she talked about your famous nightstand makeover!

I love this banquette and remember seeing it in last years Ikea catalog. Now I have to figure out how to make it work in my semi bay window. Great job!

Liz @ It's Great To Be Home said...

The finished photo looks really lovely - great job!

Hillary @ The Sweet Maple Life said...

Fate brought me here! Really it did.... I am about to start a project building benches in my eat in kitchen!!! This looks amazing... Ikea here I come!!

Donna @ dh designs said...

Great post and great project! I was trying to figure out how to get the same type of bench seating in my dining room. See my post about my perfect dining room - http://dh-designs.blogspot.com/2009/04/dream-dining-room.html. I have been looking for ways to accomplish this look without having custom cabinetry made - looks like I'll be checking Ikea out! Thanks for the inspiration!


Anonymous said...

I love your light! Mind sharing from where you bought it?

Also, I don't get the venting thing. You said it vents out the side? Are there holes in the piece of wood lifting the bench off the floor? Is the bench just resting on the planks of wood? What kind of wood is it? Did you have to paint it or did it come primed? I know, I know, so many questions. Thanks for your input and good luck with the baby!

Anonymous said...

So cute! I also love the light fixture. Can you share what it is?

Anonymous said...

love what you did!!!! given that you are so handy... any suggestions on how to do an L shape? HELP?? thxs

Lindsay said...

Anonymous - I think Ikea sells corner cabinets? This would be the only thing I can think of to get the cabinets into an L shape.

sacheson said...

I just found your blog! I love it. This exact project is one we have been planning for months. I also just posted a link to your blog from mine!

Anonymous said...

I'm thinking of doing a kitchen bench myself. Love the idea of using Ikea cabinetry and I'm wondering if you guys actually attached it to your wall, or if it sits free-standing?



Anonymous said...

I just found your blog!! Love your work!

Also love this bench.. sadly it won't work in my current kitchen but am adding it to my "inspiration folder" for my next house1 :D

Chic Coastal Living said...

Love the kitchen bench! Great job!

Anonymous said...

Hi! What color did you use on your kitchen walls?

Post a Comment

HOWDY! Comments on this blog have been disabled as we've moved blogs.
To comment on this blog post, simply look at the web address of this post and select http://aubreyandlindsay.blogspot.ca/ and delete it and replace it with www.lindsaystephenson.com/blog/ and you will be brought to the exact same post, over on our new site - where you can comment and we'll reply!

Note: Only a member of this blog may post a comment.